|
|
|
               
|
|
 | |  | | | Mosley Molingtrenchless installations England Moling England, Underground boring,Pipe ramming,Pipe bursting,HDD,Horizontal directional drilling,auger boring,moling stevenage,burst main repairs,trenchless pipe laying,Thrust boring,Vacuum excavation, | | | Company | Mosley Moling | | | Contact | Mr Ben Mosley | | Address | Shangri La Farm Estate
Todds Green
Hertfordshire
Stevenage
England Uk
SG1 9EW (MAP)
| | Telephone | 01438 842 490 | | Mobile | 01438 842 491 | | Fax | 01438 727 201 | | Email | | | Website | www.mosleymoling.co.uk | | | In the past, if a pipe or cable was needed to run from one side of a road to the other, the road would be closed and a trench dug across it.
Luckily nowadays alternatives exist.
There is a range of different Trenchless techniques, each designed to suit a particular situation. Whatever method is chosen, the end results are the same:
- Less disruption & lower reinstatement costs
- Reduced spoil removal & environmental impact
- Roadways & footpaths remain open & landscaped or protected areas remain unspoilt
A different class of service
In contrast to many companies, we do not employ subcontractors to take over the minute you have awarded your important works to us. Contracts are followed through from start to finish by our own dedicated and capable staff.
“With today’s ever shrinking lead times no-one can afford delays through unnecessarily long chains of communication, our on-site staff are empowered to respond immediately to our customers requirements.
(Luke Mosley, Director)
How Does It Work
Typically, utility installation or renewal will involve gaining access at either end of the run via pits excavated to the depth of the service to be laid or renewed.
Equipment will then be placed in one or both of the pits and installation will take place beneath the area of ground between the pits.
Or, as is the case with Horizontal Directional Drilling, the bore path can be guided to enter and exit the ground following the desired trajectory.
The size of the pits will obviously depend on the technique employed and the size of service in question. When laying services up to about 32mm in diameter the Launch and Receive pits can be as small as 750mm x 150mm and be 20 meters apart. A quick sum will show that you are looking at about 15 times less excavation than a trench!
Electrofusion Welding
Electrofusion and Butt Fusion techniques are used to make permanent joints in PE pipe work systems in the Gas and Water industries.
Electrofusion involves the use of fittings into which the pipes are inserted. An electric current is then applied to melt the assembly together. With Butt Fusion the pipes are joined directly without an additional fitting.
Successful jointing of PE pressure pipes using these methods requires strict control of the parameters and conditions. For this reason we utilise the latest in computer controlled automated Fusion equipment ensuring perfect joints time after time. |  |
Services
- Horizontal Directional Drilling
- Impact Moling
- Pipe Bursting
- Vacuum Excavation
- Domestic Lead Replacement
- Ground Penetrating Radar
- Electrofusion Welding
| | | Products and Services | | Ground Engineering | | Test Drilling | | | Regions Serviced | | England - London | |
|
| | |  | | |
| | |
| |
|
               
|
|
|
|
| Flagship Media Group LtdUnit C3, 6 Westbank Drive, Belfast, BT3 9LA, Northern Ireland Tel (+44) 28 9031 9008 Contact : Click here |
keycons003 / keycons003xLIS / keycons003x21 24/05/2012 10:23:52 / A6 / B4 / 5.078125E-02, 38.107.179.232
Trenchless, Horizontal Directional Drilling, HDD, Moling, Moleing,Boring, Electrofusion Welding, Buttfusion, Butt Fusion, EF, Lead Replacement, Water Main Replacement, Lead in Drinking Water, Burst Repair, Polypipe, Plastic Water Pipe, No-Dig, Nodig,
Trenchless, Horizontal Directional Drilling, HDD, Moling, Moleing,Boring, Electrofusion Welding, Buttfusion, Butt Fusion, EF, Lead Replacement, Water Main Replacement, Lead in Drinking Water, Burst Repair, Polypipe, Plastic Water Pipe, No-Dig, Nodig,
|
