|
|
|
              
|
|
 | |  | | | Thysis Building Productsroofing ventilation york dry fix ridge & hip systems stamford bridge breather membrane north york | | | Company | Thysis Building Products | | | Contact | John Smith | | Address | Unit 13 Full Sutton Airfield Stamford Bridge York England YO41 1HS (MAP)
| | Telephone | 01759 377233 | | | Fax | 01759 371929 | | Email | | | Website | www.thysis.co.uk | | | Eaves Ventilation RPV Roll Panel Ventilator Many of the present continuous type roll panel ventilators are susceptible to collapse when installed due to their manufacturing method, box-like shape and poor design characteristics. The Thysis Roll Panel Ventilator has been designed to avoid collapsing when installed over the insulation. The robust sinusoidal shape of the ribs provides additional strength and guarantees that when fitted over the wall plate the ventilation to the roof space remains unobstructed. The new widths also ensure that when fitted with the new higher levels of insulation the ends of the ventilators are not blocked.
- Material and colour: Black PVC
- RPV 300: 6mtr long x 300mm wide. Supplied 10 rolls per box.
- RPV 400: 6mtr long x 400mm wide. Supplied 10 rolls per box
- RPV 600: 6mtr long x 600mm wide. Supplied 10 rolls per box
- RPV 800: 6mtr long x 800mm wide. Supplied 10 rolls per box
Advantages
- Universal rafter centre fitting capability
- Reduce the risk of cold bridging by enabling insulation to be laid right into eaves
- Lightweight and durable
- Quick and easy to install, with no special tools required.
EPS 150 Eaves Protection Board The most cost effective and simple way to provide a complete felt support system that will not deteriorate, giving additional protection to the fascia detail of all roof types suitable for use with all slates and tiles. To prevent the underlay sagging at the eaves and forming a water trap behind the fascia, it is recommended that the underlay is supported by a continuous fillet.
- Size: 1500mm long
- Use: Provides support for felt to avoid ‘ponding’ behind fascia.
CF1000 Comb Filler Designed for use with profiled tiles. The Thysis comb filler creates a barrier against birds and large insects. It prevents them entering the cavity between the tiles and the roof felt.
Manufactured by injection moulding from high quality co-polymer polypropylene. The flexible design prevents any alignment problems.
OFV10 Over Fascia Vents The OFV10 has a unique low profile design with an overall height of 21mm, for minimum disruption to the eaves detail, and allows a continuous 10mm air gap.
Extremely strong to resist the weight of tiles and crushing by foot traffic. Lightweight and resistant to both corrosion and rotting, an integral 4mm grill prevents entry of large insects or rodents into the roof.
Suitable for buildings with or without soffit overhang, new or refurbishment and in buildings with corbelled eaves situations. The use of over fascia roof vents allows shallower fascia boards to be used.
OFV25 Over Fascia Vents Thysis over fascia roof vents provide unobtrusive eaves ventilation which is almost undetectable once installed. The OFV10 and OFV25 provide the equivalent of 10mm or 25mm continuous ventilation into the roof void.
Extremely strong to resist the weight of tiles and crushing by foot traffic. Lightweight and resistant to both corrosion and rotting, an integral 4mm grill prevents entry of large insects or rodents into the roof.
Suitable for buildings with or without soffit overhang, new or refurbishment and in buildings with corbelled eaves situations. The use of over fascia roof vents allows shallower fascia boards to be used.
DSV2000 Circular Disc Soffit Thysis DSV2000 Circular Disc Soffi Vent is designed to provide ventilation through new or exisiting soffit boards whilst preventing entry of insects with the use of a 4mm grid. They are fitted with a simple push fit clip system into a pre-cut 70mm hole and provide 2000sq mm of ventilation. They should be fitted every 200mm along the eaves to give continuous 10,000 sq mm ventilation per meter. Soffit boards need to be a minimum thickness of 4mm to provide a satisfactory fit.
- Material: (UV Stabilised) Polypropylene
- Unit Weight: 0.013kg
- Colours: White, Brown and Black
| | | Products and Services | | Roof Tiles | | Roofing Contractors | | Roofing Materials | | Roofing Ventilation | | Roofline | | Ventilation Contractors | | Ventilation Systems | | | Regions Serviced | | England - East Midlands | | England - Eastern | | England - London | | England - Merseyside | | England - North East | | England - North West | | England - South East | | England - South West | | Wales | | England - West Midlands | | England - Yorkshire The Humber | |
|
| | |  | | |
|
| |
| |
|
              
|
|
|
| Flagship Media Group LtdUnit C3, 6 Westbank Drive, Belfast, BT3 9LA, Northern Ireland Tel (+44) 28 9031 9008 Contact : Click here |
keycons003 / keycons003xLIS / keycons003x21 25/05/2013 02:17:48 / A7 / B8 / 0.03125, 23.22.212.158 / BOT1
roofing ventilation york dry verge systems stamford bridge tile ventilators north york loft hatches home improvements home renovations loft hatches shingle repair mississauga stamford bridge york north
roofing ventilation york dry verge systems stamford bridge tile ventilators north york loft hatches home improvements home renovations loft hatches shingle repair mississauga stamford bridge york north
Get the FREE Build App for iPhone / iPad
Test
|