               
|
|
 | |  | | | Triton Chemical Manufacturing Co Ltdwaterproofing specialists england nationwide concrete waterproofing structural waterproofing condensation control structural repairs england uk nationwide green roof systems london | | | Company | Triton Chemical Manufacturing Co Ltd | | | Contact | Kevin Dodds | | Address | unit 3/5
crayford commercial centre
Kent
Crayford
England
| | Telephone | 020 83103929 | | | Fax | 020 83120349 | | Email | | | Website | www.tritonsystems.co.uk | | | About Triton
The company holds British Board of Agrement approvals and is a BS EN ISO 9001 Quality Assured Company. Triton was represented on the technical committee responsible for drafting British Standard BS 8102 (2009) – the Code of Practice for protection of below ground structures against water from the ground – and supplies systems and products to meet the requirements of all three methods of waterproofing as defined by the Standard.
To support architects, surveyors and contractors, a full programme of training courses has been created including two RIBA approved CPD seminars on basement waterproofing. More details can be found here.
 | PLATON P5
- Economical 5mm HDPE cavity drain membrane
- Suitable for both walls and floors, above or below ground
- Impermeable to water, gas and water vapour
- Compatible with other Platon membranes
P5 is a tough and economical membrane for both remedial and new build construction. It is suitable for sub-ground tanking and also for use above ground to isolate walls which are damp or contaminated with salts. P5 can be dry lined on walls, screeded or a floating dry board system fitted on floors. |
 | PLATON P8
- BBA approved
- Suitable for use on walls and floors
- Quick and easy to install
- Suitable for use as a Radon barrier
A high-density polyethylene (HDPE) cavity drain membrane which is impermeable and resistant to the usual chemicals in building construction. Tough but pliable and can be bent around corners and projections without the risk of breaking even in very low temperatures. The product can be easily cut with a knife or scissors. |
 | PLATON P20
- BBA approved
- heavy duty, deep studded HDPE cavity drain membrane
- principally used on floors
- for areas subject to high volume water penetration
- impermeable to water, gas and water vapour
P20 is a high capacity drainage membrane recommended for use on all floor applications below ground, due to its ability to control free flowing water. The deep stud profile is designed to resist blockages caused by lime deposits. |
 | PLATON MULTI
- BBA approved
- 5mm PP cavity drain membrane
- fast track solution for walls or floors
- suitable for use above or below ground
- impermeable to water, gas and water vapour
Platon Multi can be dry lined on walls, screeded, or finished with a dry board system on floors. Particularly suitable for floors in industrial buildings, as it will transfer loading through screed layers to the underlying concrete floor. Allows contaminated floors to be upgraded. Platon Multi can be used in conjunction with other Platon membranes and the Triton Aqua Channel and Pump system. |
 | PLATON DOUBLE DRAIN
- a membrane system for external basement walls which protects underlying waterproofing from backfill damage
- filter fabric layer ensures soil cannot enter membrane cavities to impede drainage
Double Drain is installed with the filter fabric facing the backfill. It is fixed mechanically along its top edge using Platon X Cramp, which provides tear resistant fixing points. |
 | PLATON PLASTER BASE
- BBA approved
- HDPE cavity drain membrane for direct plastering
- single component, no mesh or fabric layer
- unique undercut stud design creates mechanical key for plaster
- easy to cut, fix and seal
- impermeable to water, gas and water vapour
- compatible with other Platon membranes
Platon Plaster Base can be installed on internal walls and vaulted ceilings above or below ground level. The substrate remains visible through the clear membrane for precise fixing. It is suitable for use with sand and cement renders and most lightweight and renovating plasters. |
|
|
| | |  | | |
|
| | | | | |
|
There are no companies listed in Damp Proofing Products , Tyrone at this time.
|
| | | | | |
|
|
|
|
               
|
