               
|
|
 | |  | | | DT EngineeringCrane and Hoist Services | | | Company | DT Engineering | | | Contact | Richard Arkwright | | Address | Unit 39D/Weaver Industrial Estate
Blackburne Street
Liverpool
Merseyside
Merseyside
England UK
L19 8JA (MAP)
| | Telephone | 01514941643 | | | Fax | 0560-153 2886 | | Email | | | Website | www.dtengineering.org.uk | | | D.T. Engineering specialise in the following:
- Design, manufacture, install and test of overhead travelling cranes, our cranes are designed to suit specific applications, with duty ratings up to M6. A range of options including radio control, inverter drivers and special lifting accessories are available.
- Design, manufacture, install and test of overhead runway beams, jib cranes, spreader beams, lifting beams and special lifting structures.
Refurbishment, modernization and repairs to overhead cranes and lifting systems.
- Site breakdown and maintenance service 24/7.
- Proof load testing and certification, this can be carried out on site or in our works and the relevant LOLER reports issued.
- LOLER thorough examination of lifting equipment.
The equipment examinations can be carried out on site or in our works and the relevant LOLER reports issued.
 | Fabrication & Machining
We offer the facility to Design, Fabricate and Install overhead lifting Equipment, in particular overhead cranes, swing arm jibs, runway beams, lifting and spreader beams, anchor points etc.
We also offer a Machining and Welding facility for 'one-off' jobs. |
 | Non Destructive Testing
Crane Upgrades MPI (magnetic particle inspection)
In this method the component is magnetised by passing it through a coil or by attaching electrodes and then sprayed with a solution containing iron filings in suspension.
A crack or imperfection near the surface of the component will distort the magnetic field and attract the iron filings. |
 | Proof Load Testing
A proof load test is required on any piece of lifting equipment that is new, repaired, modernised or relocated. These tests should be made in accordance with the relevant standards or the manufacturers instructions.
Please contact us for a free survey and quotation. |
 | Fall Protection Equipment
EC/PPE Directives
Part. 2.3 PPE- Fall Protection Section 3.1.2.2. Prevention of fall from height.
PPE designed to prevent falls from height or their effects, must incorporate a body harness and an attachment system which can be connected to a reliable anchorage point. |
 | Horizontal Safety Line Systems
This system allows complete freedom of movement for working at height, ensuring safety whilst traversing horizontally.
Our trained engineers will install the correct safeline for your needs after a free survey of the site.
The system conforms to BS EN 795 and is designed to meet the requirements of CMD regulations and other safety legislation such as HSG33. |
|
|
| | |  | | |
|
|
|
|
|
               
|
